Recycling And Scrap
Used machines for shops and plants that bale cardboard, plastic and scrap metal
Balers For Cardboard And Scrap
Shops and plants that produce cardboard, plastic or scrap need a baler that fits the space and the volume. We carry and source used balers and compactors.
Balers that have come through our yard include a Philadelphia Tramrail 60 inch baler and an International 36 inch low profile baler built for shops with ceiling heights near 96 inches. We list the bale size, the motor and the power each machine runs on.
- Vertical balers
- Low profile balers
- Cardboard and plastic balers
- Scrap metal balers
- Compactors
- Baler parts and wire
What To Check On A Used Baler
Size, power and the condition of the press tell you if a used baler will fit your plant.
Bale Size
Check the chamber width and bale size, and confirm your recycler accepts bales of that size.
Ceiling Height
Measure your ceiling, since vertical balers need room to open the chamber and run the platen.
Hydraulics
Look for leaks at the cylinder and hoses, and confirm the press builds pressure smoothly.
Power Supply
Most balers run on three phase power, so match the voltage on the motor plate to your building.
Door And Safety Locks
Make sure the door interlocks and emergency stop work, since a baler should never run with the door open.
Moving And Setup
Plan the move and the floor anchors, since a vertical baler is tall and heavy.
How We Help Your Shop
The same four steps whether the machine is already in our yard or still out in our network.
Tell Us The Job
Send the machine type, capacity, power supply and budget through our procurement request form.
We Search
We check our own inventory first, then reach out through our network.
Review And Inspect
We share what we find, and you are welcome to inspect the machine in person.
Load Out
Once the sale is complete we load the machine onto the carrier you arrange.
Why Shops Work With Us
A small dealer that works around the needs of small shops.
Sized For Your Space
We list bale size, motor and power so you can match a baler to your building and your recycler.
See It Before You Buy
Visit our yard in Dry Prong to look a baler over before purchase.
One Simple Request
Send a request through our form and it goes straight to the people handling your search.
Inventory Plus Network
If our yard does not have the right baler, we search our network for one.
Recycling And Scrap Questions
Our yard has carried vertical balers and compactors for cardboard, plastic and scrap metal. Inventory changes as machines sell, so check our recycling equipment listings or send us a request to ask what is in the yard today.
Low profile balers do come through our yard, including one built for ceilings near 96 inches. Send us your ceiling height and we will look for a machine that fits.
Most industrial balers run on three phase power. Each listing shows the motor and voltage, and we can confirm the details before you buy.
Need A Baler For Your Plant?
Browse what is in our yard now, or send a request and we will start the search.